Cost-effectiveness and cost-benefit analyses of fluoride varnish for caries prevention in Guangxi, China.

OBJECTIVES: The objectives of this study were to evaluate the cost-effectiveness and cost-benefit of fluoride varnish (FV) interventions for preventing caries in the first permanent molars (FPMs) among children in rural areas in Guangxi, China. METHODS: This study constituted a secondary analysis of data from a randomised controlled trial, analysed from a social perspective. A total of 1,335 children aged 6-8 years in remote rural areas of Guangxi were enrolled in this three-year follow-up controlled study. Children in the experimental group (EG) and the control group (CG) received oral health education and were provided with a toothbrush and toothpaste once every six months. Additionally, FV was applied in the EG. A decision tree model was developed, and single-factor and probabilistic sensitivity analyses were conducted. RESULTS: After three years of intervention, the prevalence of caries in the EG was 50.85%, with an average decayed, missing, and filled teeth (DMFT) index score of 1.12, and that in the CG was 59.04%, with a DMFT index score of 1.36. The total cost of caries intervention and postcaries treatment was 42,719.55 USD for the EG and 46,622.13 USD for the CG. The incremental cost-effectiveness ratio (ICER) of the EG was 25.36 USD per caries prevented, and the cost-benefit ratio (CBR) was 1.74 USD benefits per 1 USD cost. The results of the sensitivity analyses showed that the increase in the average DMFT index score was the largest variable affecting the ICER and CBR. CONCLUSIONS: Compared to oral health education alone, a comprehensive intervention combining FV application with oral health education is more cost-effective and beneficial for preventing caries in the FPMs of children living in economically disadvantaged rural areas. These findings could provide a basis for policy-making and clinical choices to improve children's oral health.

Comparison of treatment effects between clear aligners and fixed appliances in patients treated with miniscrew-assisted molar distalization.

OBJECTIVES: The biomechanics in achieving molar distalization may differ between fixed appliances and clear aligners in the control of tooth movement. The objective of this study was to compare the treatment effects between clear aligners (CA) and fixed appliances (FA) in patients treated with miniscrew-assisted molar distalization. METHODS: The sample consisted of 46 subjects with mild-to-moderate crowding. A total of 22 patients treated with clear aligners (age, 25.66 ±â€…6.11 years old) and 24 patients treated with fixed appliances (age, 24.04 ±â€…4.95 years old) for miniscrew-assisted molar distalization were included in this study. The dental and skeletal changes were evaluated by the pre- and post-treatment lateral cephalograms. RESULTS: Significant changes were found with the vertical variables SN-OP angle (2.24 ±â€…3.22°, P < .05) and SN-MP angle (0.73 ±â€…1.15°, P < .05) for the FA group when compared with the CA group (SN-OP angle 0.41 ±â€…2.26° and SN-MP angle -0.21 ±â€…1.38°, P > .05). Both treatment groups achieved a 2-3 mm. molar distalization with significant intrusion of the upper molars. The CA group showed significantly less distal tipping of molars (U6^PP angle -2.29 ±â€…3.29° and L6^MP angle -2.92 ±â€…2.49°, P < .05) compared to the FA group (-5.24 ±â€…4.28° and -5.53 ±â€…5.03°, P < .05). In addition, significant retraction and lingual inclination of the upper and lower incisors were found in both groups. LIMITATIONS: The changes of tooth position were evaluated by 2D lateral cephalograms, not 3D measurements. CONCLUSIONS: Compared to fixed appliances, clear aligners seemed to have better control of vertical dimension and distal tipping of molars in patients treated with miniscrew-assisted molar distalization.

Morphology and classification of the second mesiobuccal canal in maxillary first molars: a cone-beam computed tomography analysis in a Chinese population.

BACKGROUND: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age. RESULTS: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05). CONCLUSIONS: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes.

Effect of light-, chemical-, and dual-cured universal adhesives on the internal adaptation of resin composites to pulpal and gingival internal walls.

PURPOSE: To compare the internal adaptation of restorative systems bonded to mid-coronal and gingival dentin using light-cured, chemical-cured, and dual-cured adhesives, both immediately and after aging. METHODS: 60 molars were selected and received occluso-mesial preparations with dentin gingival margins. Restorations were performed using different restorative systems with light-cured, chemical-cured, and dual-cured adhesives. Internal adaptation was assessed by examining the percentage of continuous margin (%CM) at the pulpal and gingival dentin under a scanning electron microscope at x200 magnification. Half of the teeth were stored in sterile water for 24 hours, while the other half underwent 10,000 thermal cycles. Micro-morphological analysis was conducted on representative samples at x1,000 magnification. RESULTS: The restorative system with light-cured adhesive exhibited significantly lower %CM values at the gingival dentin, particularly after aging. Aging had a negative impact on the %CM values of the pulpal and gingival dentin in restorative systems with light-cured and dual-cured adhesives. Regional dentin variations influenced the %CM values, especially after aging, regardless of the restorative system used. The tested restorative system with chemical-cured adhesive is preferable for achieving improved internal adaptation when bonding to both mid-coronal and gingival dentin, compared to the other tested systems. CLINICAL SIGNIFICANCE: The study highlights the variations in adhesive performance between different regional dentin areas using the tested restorative systems.

Evaluation of calcium hydroxide root canal filling materials by cone beam computed tomography and three-dimensional modeling.

AIM: The aim of this study was to compare the effectiveness of filling pastes in resin prototype primary molars by cone beam computed tomography (CBCT) and 3D modeling.

Biomechanical impact of different isthmus positions in mandibular first molar root canals: a finite element analysis.

OBJECTIVE: This study used image-based finite element analysis (FEA) to assess the biomechanical changes in mandibular first molars resulting from alterations in the position of the root canal isthmus. METHODS: A healthy mandibular first molar, characterized by two intact root canals and a cavity-free surface, was selected as the subject. A three-dimensional model for the molar was established using scanned images of the patient's mandibular teeth. Subsequently, four distinct finite element models were created, each representing varied root canal morphologies: non-isthmus (Group A), isthmus located at the upper 1/3 of the root (Group B), middle 1/3 of the root (Group C), and lower 1/3 of the root (Group D). A static load of 200 N was applied along the tooth's longitudinal axis on the occlusal surface to simulate regular chewing forces. The biomechanical assessment was conducted regarding the mechanical stress profile within the root dentin. The equivalent stress (Von Mises stress) was used to assess the biomechanical features of mandibular teeth under mechanical loading. RESULTS: In Group A (without an isthmus), the maximum stress was 22.2 MPa, while experimental groups with an isthmus exhibited higher stresses, reaching up to 29.4 MPa. All maximum stresses were concentrated near the apical foramen. The presence of the isthmus modified the stress distribution in the dentin wall of the tooth canal. Notably, dentin stresses at specific locations demonstrated differences: at 8 mm from the root tip, Group B: 13.6 MPa vs. Group A: 11.4 MPa; at 3 mm from the root tip, Group C: 14.2 MPa vs. Group A: 4.5 MPa; at 1 mm from the root tip, Group D: 25.1 MPa vs. Group A: 10.3 MPa. The maximum stress in the root canal dentin within the isthmus region was located either at the top or bottom of the isthmus. CONCLUSION: A root canal isthmus modifies the stress profile within the dentin. The maximum stress occurs near the apical foramen and significantly increases when the isthmus is located closer to the apical foramina.

A systematic review and meta-analysis of the prevalence and global distribution of middle mesial canals in mandibular molars identified by CBCT.

OBJECTIVES: This systematic review and meta-analysis aimed to evaluate the prevalence of middle mesial canal (MMC) in permanent mandibular molars of different populations and regions based on cone-beam computed tomography (CBCT) studies. MATERIALS AND METHODS: PubMed, Scopus, Embase, Web of Science, and Open-Grey were searched up to October 2023 according to specific keywords. A hand search was conducted on the references of the included studies and articles from three peer-reviewed journals in endodontics. The main variable of interest was the prevalence of MMC. Additional data such as the total number of included cases, age and country of the population, CBCT device information, voxel size, and field of view details were also extracted. Extracted data were analyzed qualitatively with the JBI quality assessment checklist and quantitatively with STATA software. RESULTS: Of 32,793 studied teeth, the cumulative prevalence of MMC in both mandibular 1st and 2nd molars was 3.11% (95% CI: 2.00-4.44%). The subgroup analysis reveals a prevalence of 4.15% (95% CI: 2.69-5.89%) for mandibular 1st molars and 1.2% (95% CI: 0.2-2.83%) for mandibular 2nd molars. The highest prevalence of MMC in 1st molar was attributed to South Asia (11.24%) and Africa (6.61%). CONCLUSIONS: The prevalence of MMC varies among regions. Clinicians should be aware of the potential prevalence of MMC, particularly in mandibular first molars, as a missed MMC could result in endodontic failure. CLINICAL RELEVANCE: The presence of MMCs varies in different geographic regions (0% to 29.7%). Clinicians should always look for MMC when doing an endodontic treatment on mandibular molars, as the presence of this canal is not uncommon. We suggest searching for this canal as if searching for the second mesiobuccal canal of maxillary 1st molars.

Evaluation of various obturation techniques with bioceramic sealers in 3D-printed C-shaped canals.

This in vitro study compared various obturation techniques with bioceramic sealers for filling C-shaped 3D-printed replicas. A mandibular molar with a C-shaped root canal with a C1 configuration was obtained. After instrumenting with M3 Pro Gold files (United Dental, Shanghai, China) up to size #30/0.04, a CBCT scan of the tooth was taken. Sixty 3D-printed replicas of the tooth were created. The samples were obturated with EndoSeal TCS sealer (E. TCS; Maruchi, Wonju, Korea) or EndoSeal MTA (E. MTA; Maruchi, Wonju, Korea) (n = 30). The samples in each group were obturated with the following techniques (n = 10): (1) single-cone technique (SC), (2) SC with ultrasonic activation (UA), and (3) cold hydraulic compaction (CHC). Following incubation, the replicas' apical, middle, and coronal thirds were inspected under a digital microscope, and the proportion of filling material and void were calculated. Also, the obturation time and sealer extrusion were recorded. Data were analyzed using ANOVA, LSD post-hoc, and the chi-square tests (α = 0.05). The results indicated that in the apical third, E. TCS-SC, E. TCS-UA, and E. MTA-UA had the lowest void percentage among groups (p < 0.05). In the middle thirds, samples obturated with E. TCS-UA showed a significantly lower void percentage among all groups (p < 0.05). However, in the coronal third, E. TCS-CHC showed the least void percentage (p < 0.05), followed by E. TCS-UA and E. MTA-CHC. The E. TCS-SC and E. TCS-UA were the least time-consuming methods (p < 0.05). Sealer extrusion significantly differed among the groups, with E. MTA-UA and E. TCS-UA showing higher incidence (p = 0.019). It was concluded that E. TCS-UA was the most convenient obturation technique. However, care must be taken when obturating the canals with high flow and ultrasonic activation near the vital anatomical landmarks.

Evaluation of the effects of postprocessing settings in digital bitewing radiographs on proximal caries detection.

OBJECTIVE: Radiographs are an integral part of detecting proximal caries. The aim of this study was to evaluate the effect of contrast, brightness, noise, sharpness, and γ adjustment of digital intraoral radiographs on the diagnosis of proximal caries. MATERIALS AND METHODS: In this in vitro study, 40 extracted teeth including 20 premolars and 20 molars with enamel lesions (white spot or dentin discoloration seen through the enamel) were mounted together in groups of eight inside the skull. Bitewing radiographic images of each dental group were obtained by a photostimulable phosphor plate sensor with exposure conditions of 8 mA, 70 kV, and 0.2 s. The images were reconstructed by the built-in software and examined by two oral and maxillofacial radiologists in various settings of contrast, brightness, sharpness, noise, and γ. The teeth were then cut mesiodistally and the presence or absence of caries was confirmed by an oral and maxillofacial pathologist using a stereomicroscope. The data were then analyzed using the κ agreement coefficient, sensitivity, specificity, and accuracy (α = .05). RESULTS: Adjustment of brightness and contrast led to higher diagnostic performance with an accuracy of 82.5% and 83.8 (for observers 1 and 2, respectively) and 82.5% (for both observers), respectively. Noise adjustment was the least helpful approach for diagnosis of proximal dental caries among other adjustments, with an accuracy of 78.8% and 77.5% for observers 1 and 2, respectively. CONCLUSION: Brightness and contrast setting was more efficient in improving the diagnostic potential of bitewing radiographs compared to other adjustments.

An improved diagnostic method for taurodontism and a comparative study on its effectiveness evaluation.

OBJECTIVE: The two commonly used diagnostic methods for taurodontism are susceptible to aging changes, mastication wear and other factors. Therefore, this study proposed an improved diagnostic method for taurodontism, and compared it with the previous two methods as a supplement for taurodontism diagnosis. METHODS: The included patients were aged 10-89 years and admitted to the Department of Stomatology of Hebei Eye Hospital from June 1, 2022 to May 31, 2023. Eighty cone-beam computed tomography images were divided equally into 4 groups: 10-29, 30-49, 50-69, and 70-89 years old. The right mandibular first molars were selected as measurement objects. Firstly, |BD| and taurodontism index (TI)-related parameters were measured using Shifman and Chanannel's method and crown-body(CB) and root (R) lengths was measured by Seow and Lai's method. The improved method used the length from the cementoenamel junction(CEJ) to the root bifurcation point(body, B)and the root length(root, R)as the measurement objects. Finally, TI, CB/R ratios, and B/R ratios were calculated according to the formulas given below. One-way ANOVA analysis was mainly used to compare the differences in the values, indices and ratios of taurodontism among different age groups (p<0.05). RESULTS: With the increase of age, |BD| and TI values decreased significantly (p<0.01). The CB/R ratios of 70-89 years group were significantly lower than those of the other three groups (p<0.01). Ratios derived from the improved method were significantly lower in the 70-89 years than in 10-29 years group (p<0.05). CONCLUSIONS: The |BD| and TI parameters proposed by Shifman and channel are significantly influenced by age. The measurements of Seow and Lai (CB/R ratios) were less affected by age compared with those of the former. The improved method(B/R ratios) was least affected by age, which would reduce error and bias in the measurement of taurodontism and obtain more objective results in older patients.

Cost-effectiveness of restorative treatments for permanent molars with severe molar incisor hypomineralization: perspectives for the Brazilian public health system.

OBJECTIVES: To undertake a cost-effectiveness analysis of restorative treatments for a first permanent molar with severe molar incisor hypomineralization from the perspective of the Brazilian public system. MATERIALS AND METHODS: Two models were constructed: a one-year decision tree and a ten-year Markov model, each based on a hypothetical cohort of one thousand individuals through Monte Carlo simulation. Eight restorative strategies were evaluated: high viscosity glass ionomer cement (HVGIC); encapsulated GIC; etch and rinse adhesive + composite; self-etch adhesive + composite; preformed stainless steel crown; HVGIC + etch and rinse adhesive + composite; HVGIC + self-etch adhesive + composite, and encapsulated GIC + etch and rinse adhesive + composite. Effectiveness data were sourced from the literature. Micro-costing was applied using 2022 USD market averages with a 5% variation. Incremental cost-effectiveness ratio (ICER), net monetary benefit (%NMB), and the budgetary impact were obtained. RESULTS: Cost-effective treatments included HVGIC (%NMB = 0%/ 0%), encapsulated GIC (%NMB = 19.4%/ 19.7%), and encapsulated GIC + etch and rinse adhesive + composite (%NMB = 23.4%/ 24.5%) at 1 year and 10 years, respectively. The benefit gain of encapsulated GIC + etch and rinse adhesive + composite in relation to encapsulated GIC was small when compared to the cost increase at 1 year (gain of 3.28% and increase of USD 24.26) and 10 years (gain of 4% and increase of USD 15.54). CONCLUSION: Within the horizon and perspective analyzed, the most cost-effective treatment was encapsulated GIC restoration. CLINICAL RELEVANCE: This study can provide information for decision-making.

Chewing asymmetry in dogs: Exploring the importance of the fossa masseterica and first molar teeth morphology.

Dogs are animals with strong bite force. This strong bite mechanism has led to significant changes in the skeletal system such as fossa masseterica. It can be thought that one side is used more than the other side in chewing and is related to the preference of using the same side's hand, eye and foot. In the study, directional asymmetry and fluctuating asymmetry, which occurs as a result of chewing asymmetry, were examined on the first molar teeth and the fossa masseterica in 85 dog mandibles including a wide diversity of morphotypes. The association of high PC1 values for directional asymmetry with a pronounced cranial index, as evident in breeds like Pekingese, Pomeranian and Bulldog, indicates a potential evolutionary or selective breeding trend favouring brachycephaly. On the contrary, guardian breeds like the German shepherd and Bernese mountain dog, which typically require strong jaws for their roles, showcased reduced PC1 values, which might be related to their functional morphology. Similarly, the PCA results for the first molar teeth shape variations also highlighted the influence of cranial shape, with boxer dogs displaying notably higher PC1 values. The fluctuating asymmetrical distributions provided valuable insights into individualistic variations. Interestingly, no specific breed distribution trend was observed for these asymmetries, indicating a more individual-based variation rather than breed-based. It is essential to note that while these results provide valuable insights, further studies are required to understand the underlying causes better. Factors like genetic variations, developmental processes, dietary habits and external environmental factors could play pivotal roles in these observed morphological differences.

Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT.

AIM AND BACKGROUND: To compare the root canal volume in primary teeth using hand and rotary instruments and to evaluate root canal filling techniques and flow of root canal obturation materials in the postinstrumented root canal volume using spiral computed tomography (SCT). MATERIALS AND METHODS: Freshly extracted 16 primary molars were randomly divided into two groups and subjected to SCT analysis before and after instrumentation. For the manual technique (group I) with eight teeth were prepared using K files, and rotary (group II) eight teeth preparation was performed with ProTaper files. The filled volume in each canal was measured using SCT, and the percentage of obturated volume was calculated. The data were statistically analyzed using the Mann-Whitney U test. RESULTS: There was a statistically significant difference in both groups' volume of root canals enlarged. Even though both K files and the ProTaper system brought about enlarged canals after instrumentation, there was a statistically significant increase in volume after using K files in two canals. In three canals, there was a statistically significant increase in volume after using ProTaper. Irrespective of the obturation technique and materials used, there is no statistically significant difference in the volume after obturation. CONCLUSION: From the results of this study, the ProTaper file system shows suitable volumetric enlargement up to an optimum level, which is needed in primary root canal walls, and is better in canal shaping, as evidenced by good postobturation volume. CLINICAL SIGNIFICANCE: The traditional method of cleaning and shaping the root canals in permanent teeth using manual stainless-steel files can lead to undesirable curvatures in root canal morphology, making correctly filling the root canals difficult. It is also time-consuming and sometimes leads to iatrogenic errors. Rotary nickel-titanium (Ni-Ti) instrumentation techniques have been developed to overcome these problems. How to cite this article: Yadav DBUC, Varma RB, Kumar JS, et al. Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT. J Contemp Dent Pract 2024;25(3):250-259.

Elimination of E. faecalis with NaOCl versus chlorhexidine gluconate from primary molar root canal systems: an ex vivo model study.

OBJECTIVES: This ex vivo human study aimed to evaluate the efficacy of NaOCl and chlorhexidine gluconate (CHG) irrigations in eliminating Enterococcus faecalis from the RCS of primary molars. MATERIALS AND METHODS: Disinfected extracted primary molars were inoculated with E. faecalis for 24 h. Then, the RCS samples were then irrigated with either 2.5% NaOCl, 0.2% and 2% CHG, or sham saline. The samples were collected immediately after irrigation; and 24 h later, the bacterial viability and counts were measured using blood agar and qRT-PCR, respectively. Histological sections were used to measure E. faecalis penetration and viability in dentin tubules using fluorescence microscopy. RESULTS: The recovery of viable E. faecalis after the irrigation of the primary molars showed more significant bactericidal effects of NaOCl and 0.2% and 2% CHG than of saline. Immediately after the irrigation, the NaOCl group showed the greatest reduction in E. faecalis; and 24 h later, all the groups had lower viable E. faecalis than the saline control. The bacterial penetration was also lowest in the NaOCl group, although there was no difference in bacterial viability in the tubules between the groups. CONCLUSION: In primary teeth, NaOCl and CHG showed similar degrees of bacterial elimination efficacy in terms of E.faecalis. CLINICAL RELEVANCE: Within the limitations of this study, NaOCl and CHG have the similar ability to perform endodontic irrigation of primary ex vivo teeth regarding the elimination of E.faecalis, but NaOCl penetrates dentin tubules better.

Post-endodontic pain in curved canals prepared with different rotary instrumentation techniques: A randomized controlled trial.

BACKGROUND: Curved root canals are associated with the highest number of procedural errors during endodontic instrumentation. Recently, numerous rotary instruments have been developed, with both manual and automated mechanisms, to facilitate endodontic treatment and manage the complications related to it. OBJECTIVES: The aim of the study was to assess post-endodontic pain after using the HyFlex® EDM OneFile (HEDM), WaveOne® Gold (WOG) and XP-endo® Shaper (XPS) systems in the preparation of curved canals in patients with asymptomatic irreversible pulpitis. MATERIAL AND METHODS: A total of 45 molars with curved canals and asymptomatic irreversible pulpitis were randomly divided into 3 equal groups based on the instrumentation used: HEDM (group A); WOG (group B); and XPS (group C). All teeth were prepared according to the manufacturers' instructions. Postendodontic pain was assessed using the visual analog scale (VAS) at 6, 12, 18, 24, 48, and 72 h after root canal instrumentation. The data was analyzed using the one-way analysis of variance (ANOVA) and the paired-samples t test with the Bonferroni correction, with a p-value of 0.05 set for statistical significance. RESULTS: The highest levels of post-endodontic pain were recorded at 6 h after treatment. Then, the values gradually decreased until the pain nearly vanished after 72 h. No statistically significant differences were observed in the VAS scores between groups A and B. At the same time, group C showed the lowest VAS scores at all follow-up time points. CONCLUSIONS: The use of the XPS system resulted in the lowest pain scores at all follow-ups. The HEDM and WOG groups showed no differences in the pain scores throughout the whole follow-up period.

Long-term skeletodental changes with early and late treatment using modified C-palatal plates in hyperdivergent Class II adolescents.

OBJECTIVES: To compare skeletodental changes between early and late treatment groups using modified C-palatal plates (MCPP) and long-term retention outcomes in hyperdivergent Class II adolescents. MATERIALS AND METHODS: Seventy-one hyperdivergent Class II patients were divided into four groups according to treatment modality and treatment timing: group 1, early treatment with MCPP (n = 16; 9.9 ± 0.9 years); group 2, late treatment with MCPP (n = 19; 12.3 ± 0.8 years); group 3, early treatment with headgear (HG; n = 18; 9.6 ± 0.8 years); and group 4, late treatment with HG (n = 18; 12.1 ± 1.2 years). Lateral cephalograms were taken and skeletal and dental variables were measured. For statistical analysis, paired t-tests, independent t-tests, and multiple regression were performed. RESULTS: The early MCPP group showed a more significant decrease in mandibular plane angle than the late MCPP group did, and vertical control was more efficient in the early group than in the late group. In the MCPP groups, both FMA and SN-GoGn were increased with late treatment but decreased with early treatment, and the difference was statistically significant (P < .01). The early-treatment MCPP group had a significant decrease in SN-GoGn of 0.6° compared with an increase of 1.7° in the early treatment HG group (P < .01). Posttreatment stability of both the early and late MCPP groups was maintained in long-term retention. CONCLUSIONS: Early MCPP showed more significant vertical control than late MCPP. However, there was no difference in long-term stability between early and late groups.

The effects of re-irradiation on the chemical and morphological properties of permanent teeth.

This study aimed to assess the in vitro effects of re-irradiation on enamel and dentin properties, simulating head and neck cancer radiotherapy retreatment. Forty-five human permanent molars were classified into five groups: non-irradiated; irradiated 60 Gy, and re-irradiated with doses of 30, 40, and 50 Gy. Raman spectroscopy, scanning electron microscopy (SEM), and energy dispersive x-ray spectroscopy (EDS) were employed for analysis. Raman spectroscopy assessed intensity, spectral area, and specific peaks comparatively. Statistical analysis involved Kolmogorov-Smirnov and One-Way ANOVA tests, with Tukey's post-test (significance level set at 5%). Significant changes in irradiated, non-irradiated, and re-irradiated enamel peaks were observed, including phosphate (438 nm), hydroxyapatite (582 nm), phosphate (960 nm), and carbonate (1070 nm) (p < 0.05). Re-irradiation affected the entire tooth (p > 0.05), leading to interprismatic region degradation, enamel prism destruction, and hydroxyapatite crystal damage. Dentin exhibited tubule obliteration, crack formation, and progressive collagen fiber fragmentation. EDX revealed increased oxygen percentage and decreased phosphorus and calcium post-reirradiation. It is concluded that chemical and morphological changes in irradiated permanent teeth were dose-dependent, exacerbated by re-irradiation, causing substantial damage in enamel and dentin.

Efficient Production of 9,22-Dihydroxy-23,24-bisnorchol-4-ene-3-one from Phytosterols by Modifying Multiple Genes in Mycobacterium fortuitum.

C19 steroids and C22 steroids are vital intermediates for the synthesis of steroid drugs. Compared with C19 steroids, C22 steroids are more suitable for synthesizing progesterone and adrenocortical hormones, albeit less developed. 9,22-dihydroxy-23,24-bisnorchol-4-ene-3-one(9-OHBA), due to its substituents at positions C-9 and C-22, is a beneficial and innovative steroid derivative for synthesizing corticosteroids. We focused on the C22 pathway in Mycobacterium fortuitum ATCC 35855, aiming to develop a productive strain that produces 9-OHBA. We used a mutant strain, MFΔkstD, that knocked out kstds from Mycobacterium fortuitum ATCC 35855 named MFKD in this study as the original strain. Hsd4A and FadA5 are key enzymes in controlling the C19 metabolic pathway of steroids in Mycobacterium fortuitum ATCC 35855. After knocking out hsd4A, MFKDΔhsd4A accumulated 81.47% 9-OHBA compared with 4.13% 9-OHBA in the strain MFKD. The double mutant MFKDΔhsd4AΔfadA5 further improved the selectivity of 9-OHBA to 95.13%, and 9α-hydroxy-4-androstenedione (9-OHAD) decreased to 0.90% from 4.19%. In the end, we obtained 6.81 g/L 9-OHBA from 10 g/L phytosterols with a molar yield of 80.33%, which showed the best performance compared with formerly reported strains.

Novel cryotherapy technique for pulpotomy in mature permanent teeth with symptomatic irreversible pulpitis- a randomized controlled trial.

OBJECTIVES: To assess the effect of cryotherapy on haemostasis, post-operative pain, and the outcome of full pulpotomy performed in mature permanent teeth with symptomatic irreversible pulpitis. MATERIALS AND METHODS: The study included sixty mature permanent mandibular molar teeth with symptomatic irreversible pulpitis and no periapical rarefaction. After coronal pulp tissue amputation, teeth were randomly allocated to one of two groups (n = 30 each). In group I (conventional pulpotomy), a sterile cotton pellet moistened with 2.5% NaOCl was used for haemostasis. In group II (cryotherapy), the pulp chamber was continuously lavaged with 2.50C normal saline solution for haemostasis using an indigenous portable cryotherapy irrigation unit. Following haemostasis, the pulp was capped with mineral trioxide aggregate and the tooth was restored with resin composite. The time taken to achieve haemostasis was recorded. Preoperative and 24, 48 and 72 h postoperative pain was measured using the Numerical Rating Scale. The pulpotomy outcome was assessed at the 12-month follow-up. Data were analyzed using Fischer's exact test, two-sample t-test, two-sample Wilcoxon rank-sum test, Friedman Test, and Wilcoxon Signed Rank Test. RESULTS: The cryotherapy group achieved haemostasis in less time (p < 0.05). There was a significant pain reduction at 24 and 48 h in the cryotherapy group when compared with the conventional pulpotomy group (P < 0.005). The overall success rate of pulpotomy after 12 months was 88% (n = 22) in both study groups(p < 0.05). CONCLUSIONS: Cryotherapy application reduces postoperative pain and has no adverse effect on the outcome of pulpotomy in permanent teeth with symptomatic irreversible pulpitis. CLINICAL RELEVANCE: The cryotherapy can be incorporated in pulpotomy protocol as an adjunct to minimize post-operative pain.

Fully automated deep learning approach to dental development assessment in panoramic radiographs.

BACKGROUND: Dental development assessment is an important factor in dental age estimation and dental maturity evaluation. This study aimed to develop and evaluate the performance of an automated dental development staging system based on Demirjian's method using deep learning. METHODS: The study included 5133 anonymous panoramic radiographs obtained from the Department of Pediatric Dentistry database at Seoul National University Dental Hospital between 2020 and 2021. The proposed methodology involves a three-step procedure for dental staging: detection, segmentation, and classification. The panoramic data were randomly divided into training and validating sets (8:2), and YOLOv5, U-Net, and EfficientNet were trained and employed for each stage. The models' performance, along with the Grad-CAM analysis of EfficientNet, was evaluated. RESULTS: The mean average precision (mAP) was 0.995 for detection, and the segmentation achieved an accuracy of 0.978. The classification performance showed F1 scores of 69.23, 80.67, 84.97, and 90.81 for the Incisor, Canine, Premolar, and Molar models, respectively. In the Grad-CAM analysis, the classification model focused on the apical portion of the developing tooth, a crucial feature for staging according to Demirjian's method. CONCLUSIONS: These results indicate that the proposed deep learning approach for automated dental staging can serve as a supportive tool for dentists, facilitating rapid and objective dental age estimation and dental maturity evaluation.